Community DXP4800 Guía de instalación descargar pdf (Pagina 9)

 LEVEL - Gain, -40.00dB to +15.00dB in 0.25dB steps.

 POL - Polarity, can be normal (+) or inverted (-).

 DELAY - Delay in 21us steps. Can be displayed in ms, ft or m. The time unit of the delay

can be changed in the System menu. The maximum delay permitted is 24,000 steps

(500ms).

EQ - EQ parameters

1:XXXXXX MENU:EQ

EQ# :1 BW:0.33oct

LEVEL:0.00dB Q=4.36

FREQ :1000Hz TYPE:Param

 EQ# - Selects one of the 6 available Equalizers.

 LEVEL - EQ level gain. Ranges from -30.00dB to +15.00dB in 0.25dB steps.

 FREQ - EQ center frequency. Ranges from 20 to 20,000Hz in either 1Hz steps or 1/36

octave steps. The sampling rate and the frequency steps can be selected in the System

Menu.

 BW - EQ Bandwidth. Ranges from 0.02 to 2.50 octaves in steps of 0.01 octave steps for

PEQ. The Q value is automatically shown beneath the octave value. For Lo-Slf or Hi-

Shf, it is either 6 or 12dB/Oct.

 Type - Type of EQ. The types can be parametric (PEQ), Lo-shelf (Lo-shf) and Hi-shelf

(Hi-shf).

Ch-Name - Channel Name

1:XXXXXX MENU:Ch-Name

NAME:XXXXXX

 Name - Channel name. It is 6 characters in length.

6.2 Output Menus

Each output channel of the DXP4800 has a separate menu key. There are 6 menus for each

output channel.

Signal - Signal parameters

OUT

1:XXXXXX MENU:Signal

LEVEL:0.00dB

POL :+

DELAY:0 (000.000ms)

 Refer to the Input Menus for details

Community DXP4800 Owner’s Manual Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Sin comentarios

Community DXP4800 Guía de instalación Pagina 9