
R-SERIES • R-MAX
Community strives to improve its products on a continual basis. Specications are therefore subject to change without notice.
R2-64MAX
HIGH OUTPUT FULL-RANGE 60° X 40°
WEATHER-RESISTANT LOUDSPEAKER
Light Grey (standard)
TECHNICAL SPECIFICATIONS
FEATURES
• Modern stadium loudspeaker, designed to meet the needs
of today's sporting venues for superb musicality, excellent
speech intelligibility and very high output
• Signal aligned passive MF/HF horn coaxially mounted in
front of electronically signal aligned LF drivers
• Large format 1.4" exit HF, high output M200HP, and
premium high output LF drivers
• High sensitivity and very high output (133 dB max), with
at extended frequency response
• Application specic coverage patterns
DESCRIPTION
The R2-64MAX is a three-way, full-range loudspeaker system
designed to provide "No Compromises" premium music
reproduction at very high output levels, and also improves the
legendary R2 voice projection and intelligibility capabilities.
It is designed with the same materials and construction
as the standard R2 for extreme weather resistance, and
can withstand long-term exposure to tough environmental
conditions.
The R2-64MAX is constructed with premium components
in a biamp format to maximally optimize its performance. It
uses a 1.4" exit HF compression driver that features a copper
shorting ring and hybrid diaphragm to reduce resonances
while maintaining excellent HF extension. Operated with a
high crossover frequency, the large HF driver maintains very
high headroom, delivering effortless performance. The dual,
high power 12" LF drivers feature an aluminum demodulation
ring for very clean, low distortion performance. The midrange
features a higher performance version of the legendary low
compression ratio M200 2" exit compression driver, achieving
3 dB greater output with extremely low distortion. The passive
MF/HF horn signal aligns the drivers for the best possible
music and speech performance. The result is an excellent
loudspeaker system that is capable of exceeding expectations
in any application.
APPLICATIONS
• Stadiums and Arenas
• Racing Tracks
• Theme Parks, Amusement Parks
• Outdoor Entertainment Centers
• Fairgrounds, Rodeos, Air Shows
• Multipurpose outdoor
and indoor venues
• Convention Centers
• Portable Sound
Systems
SYSTEM
TRANSDUCERS LF:
MF:
HF:
2 x 12" inherently weather-resistant cones with
3" voice coil, neodymium motor and aluminum
demodulation ring
1 x 2" exit, M200HP compression, 3.5" diaphragm,
2.2" Voice coil, high temp non-metallic diaphragm
1 x 1.4" exit compression, 2.87" voice coil, copper
shorting ring, titanium diaphragm with mylar surround
Operating Mode: Biamp
Operating Range
1
: 70 Hz to 22 kHz (-10 dB)
Frequency Response
1
: 85 Hz to 18 kHz (-3 dB)
Nominal Beamwidth (-6dB): 60° x 40°, 1.6 kHz to 10 kHz
Axial Q / DI: 24.89/13.96, 1.6 kHz to 10 kHz
Maximum Output
2
without EQ
3
:
with EQ
4
:
133 dB (139 dB Peak)
132 dB (138 dB Peak)
Operating Mode:
Biamp (Passive MF/HF)
Crossovers
5
LF:
MF:
Passive MF/HF:
4
th
order (24 dB/oct) 450 Hz, Active
8
th
order (48 dB/oct) 450 Hz, Active
8
th
order (48 dB/oct) 3.3 kHz
Recommended Processing
6
: DSP with CONEQ™ power response correction
TRANSDUCER PERFORMANCE
Maximum Input Ratings LF:
MF/HF:
1200W Continuous (98V) / 4800W Peak (196V)
150W Continuous (35V) / 300W Peak (70V)
Sensitivity
7
LF:
MF/HF:
103 dB (100 Hz - 500 Hz)
108 dB (400 Hz - 18 kHz)
Maximum Output
8
(without EQ)
3
LF:
MF/HF:
(with EQ)
4
LF:
MF/HF:
134 dB (140 dB peak)
130 dB (136 dB peak)
133 dB (139 dB peak)
129 dB (135 dB peak)
Nominal Impedance LF:
MF/HF:
8 ohms, (9.3 ohms @ 250 Hz minimum)
8 ohms, (5.6 ohms @ 5 kHz minimum)
PHYSICAL
Input Connection: 2 x 12' (3.6 m) 16-2 SJOW cables
Enclosure: Hand-laminated multilayer berglass
Finish: Paintable, light grey gel-coat (RAL #7038)
Mounting/Rigging
Provisions:
(5) 1/2"-13 rigging points; Steel zinc-rich epoxy
dual-layer powder-coated bracket;
(2) Aluminum aiming straps to secure angle
Grille:
3-layer Weather-Stop™ with polyester mesh, foam,
and zinc-rich epoxy dual-layer powder-coated
perforated steel color-matched to enclosure
Environmental: IEC529 IP55W rating with a minimum 5° down-tilt
Dimensions – H x W x D: 24.75" x 24.75" x 30.75" (629 x 629 x 781 mm)
Loudspeaker Unit Weight:
92 lbs (42.2 kg) loudspeaker only
115 lbs (52.2 kg) with yoke bracket
Shipping Weight: 125 lbs (56.7 kg)
CONFIGURE-TO-ORDER (CTO) OPTIONS
Custom Colors: Exterior grade, paint nish; Customer dened RAL#
Cable: Custom length
Comentarios a estos manuales